IP network Video Camera (H.264, Full D1)

H.264/MPEG4,Full D1 720*576 ,30fps ,PoE, WLAN, IP network Camera

IP network Video  Camera (H.264, Full D1)

1.Features and BenefitsThe IP camera is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality(D1,720X480) at a reasonable bandwidth through a standard TCP/IP network. Thats because it is Ethernet ready and has the H.264 compression inside. In addition, with the powerful IP surveillance software EasyView Professional, this IP camera is your best choice of building up either conventional IP surveillance system or intelligent IP surveillance system. Up to D1 H.264 video decodingWith hardware H.264 compression chip inside, the composite video inputs can be efficiently compressed into H.264 bit stream without any delay. The compression engine can support up to D1 image resolution.

Dual Video Stream Output Via EthernetDual Video Stream Output can solve the problem of bandwidth limitation. The video stream will be encoded into two bit streams to proceed local storage and remote network transmission.

Digital Time Code EmbeddedThe Digital Time Code Embedded function is to embed the recording time in the H.264 bit stream. Therefore, each image frame has its respective time when it was recorded. It is very useful when users want to find the video at an exact time or between a certain time intervals.

Build-in Web ServerThe user can access to the real-time video directly by Internet browser.

Powerful Surveillance SoftwareTo extend the capabilities of the IP camera, a powerful surveillance program is included in the package and is totally free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording, alarm recording and manual recording keep every important image recorded in the local disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want.

2.Parameters

Compression:H.264 & G.726Picture Resolution:720*576 720*288 352*288Image Frame Rate:25 / 30 fpsBit Rate:64kbps-3000kbpsAudio Sampling Rate:8K/s,16bit/sampleCCD Size:1/3 inchCCD:1/3 inch Super HAD 480LLens Mount:C/CSAdjustment:Brightness/ Contrast/ Hue/ SaturationControl Interface:RS485/Lens ControlIE Viewing:WEB SERVER Built InVideo Output:1Alarm Input/Output:1, TerminalNetwork Port:10/100BASE-TPower Supply:0.4A12VDC / 180~240VAC (Power Adapter)Dimensions(WxHxD):61mmx58mmx120mm Operating Temperature:-20~50 Operating Humidity:<90%

3.Safety Instructions

Dont use the power supply with other voltagesDont open the housing of the productCleaningDisconnect this video product from the power supply before cleaning. AttachmentsDo not use attachments not recommended by the video product manufacturer as they may cause hazards.Water and MoistureDo not use this video product near water, for example, near a bahtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool and the like.Only install this device and the power supply in a dry place protected from weather.

5. Physical Description

OUT:AUDIO OUTIN :AUDIO INPUT    G  :AUDIO GNDIN: Alarm InputNO: Alarm OutputCOM:ALARM GNDA:485A  B:485BPower Input: DC 12V & 0.4A Input: When the power supply is normal, the red light on.   RJ-45:10/100BASE-T, self-adaptedRST: Reset button. Using a suitable pointed object, press and continue to hold the reset button depressed for 3 seconds when the power on.VIDEO IN: Video Input, BNC

6.Basic Connections

Follow the procedures below to connect the video server to the respective apparatuses.1. Connect an analog monitor to IP Camera video out (BNC connector).2. Connect the power adaptor to IP camera.3. Connect the IP camera with Ethernet.4. Connect a PC to the Ethernet hub.

Note: software installation and operation please refers to software user manual.

IP network Video Camera (H.264, Full D1)